Field Solutions
Common Site Issues. Practical Ways to Investigate Them.
Drilling and stabilization performance depends on more than the chemical being added. Soil or formation conditions, water quality, product grade, concentration, mixing, circulation and operating practices can all influence the result.
MudX approaches field issues by first understanding the symptom and then identifying the likely contributing factors.
Borehole Collapse or Instability
What You May See
Borehole enlargement, wall instability, recurring sloughing or difficulty maintaining bore condition.
Possible Causes
Formation characteristics, inadequate fluid properties, insufficient filter-cake development, water interaction or operating conditions.
What to Check
Formation type, fluid viscosity, circulation, water quality and drilling-fluid condition.
MudX Approach
Evaluate the drilling-fluid system and select the appropriate polymer grade and operating conditions for the formation.
Excessive Fluid Loss
What You May See
Rapid loss of drilling fluid into the formation or difficulty maintaining fluid level.
Possible Causes
Highly permeable formations, fractures, insufficient fluid-loss control or unsuitable fluid-system properties.
What to Check
Formation permeability, fluid properties, polymer concentration and site conditions.
MudX Approach
Review the complete fluid system and evaluate the appropriate polymer grade and concentration for the application.
Cuttings Settling
What You May See
Cuttings accumulation, poor transport or excessive solids remaining in the bore.
Possible Causes
Insufficient carrying capacity, unsuitable viscosity, circulation rate or high solids loading.
What to Check
Fluid viscosity, circulation, solids concentration and drilling conditions.
MudX Approach
Review the fluid properties and operating conditions together rather than relying only on increasing chemical dosage.
Low pH or Unstable Fluid Chemistry
What You May See
Changes in drilling-fluid behaviour, inconsistent polymer performance or undesirable fluid chemistry.
Possible Causes
Water chemistry, contamination, inadequate alkalinity control or changes in the fluid system.
What to Check
pH, water source, fluid condition and compatibility of the selected products.
MudX Approach
Evaluate the fluid chemistry and use appropriate pH-control measures where required.
Weak Stabilization
What You May See
Insufficient cohesion or inconsistent stabilization results.
Possible Causes
Soil characteristics, moisture conditions, product selection, dosage or mixing procedure.
What to Check
Soil type, moisture, mixing uniformity and application conditions.
MudX Approach
Evaluate the stabilization system against the actual soil and application requirements.
Inconsistent Batch Performance
What You May See
Different behaviour between supplies or unexpected changes during application.
Possible Causes
Product grade changes, storage conditions, water quality, mixing practices or batch-related variation.
What to Check
Product identification, batch documentation, storage, water source and mixing procedure.
MudX Approach
Use batch traceability and quality documentation to help identify the material and investigate the cause.
Need help with a field issue?
Share your site conditions and challenges. Our team can help you identify the right approach and product solution.